Verifying the blocksize of an NTFS volume

Published   Read time 40 sec(s)   (2436 views).  Windows  

This simple post provides details on how to verify the block size of an NFS volume, using the fsutil command.

Run the following command on the client from a cmd prompt with elevated privileges (Run as Administrator):

fsutil fsinfo ntfsinfo <drive_letter>

For example:

C:\Windows\system32> fsutil fsinfo ntfsinfo c:
NTFS Volume Serial Number :       0x68ca8fdfca8fa840
Version :                         3.1
Number Sectors :                  0x00000000253fb7ff
Total Clusters :                  0x0000000004a7f6ff
Free Clusters  :                  0x000000000234679a
Total Reserved :                  0x0000000000000780
Bytes Per Sector  :               512
Bytes Per Physical Sector :       4096
Bytes Per Cluster :               4096
Bytes Per FileRecord Segment    : 1024
Clusters Per FileRecord Segment : 0
Mft Valid Data Length :           0x000000000e040000
Mft Start Lcn  :                  0x00000000000c0000
Mft2 Start Lcn :                  0x0000000000000002
Mft Zone Start :                  0x000000000260c320
Mft Zone End   :                  0x0000000002618b40
RM Identifier:        9CF6394C-499E-11E4-933E-8C117903D491