devfsadm articles - church1e's blog

Setting up a Sun ZFS Storage Applicance as an iSCSI device

Updated 25 Mar 2015 Read time 2 min(s) 31 sec(s) (640 visits).

Simple steps to setup a Sun ZFS Storage Applicance as an iSCSI device.

Updated 10 Oct 2012 Read time 4 min(s) 20 sec(s) (2830 visits).

This article provides simple instructions to create a Flash Archive image that can be loaded onto the target system to recover from a failed drive.

Updated 3 Oct 2003 Read time 2 min(s) 5 sec(s) (3079 visits).

During a reconfiguration restart, a device hierarchy is created in the /devices file system to represent the devices connected to the system.

Updated 11 Feb 2011 Read time 1 min 42 sec(s) (2564 visits).

This is a short article on how to rescan newly added luns in Solaris, Linux, AIX and HP-UX operating systems.

Updated 28 Jul 2002 Read time 2 min(s) 40 sec(s) (2471 visits).

Use the following procedure to configure a Solaris system to utilise fabric tape.

Updated 20 Feb 2004 Read time 1 min 36 sec(s) (2649 visits).

To make an updated /kernel/drv/st.conf file active, it is necessary to reload the st (SCSI Tape) kernel module

Updated 11 Feb 2010 Read time 1 min 32 sec(s) (2776 visits).

This article simply provides a list of commands to allow Solaris to detect newly added devices.

Updated 5 Jan 1999 Read time 11 sec(s) (2389 visits).

Ever needed to get Solaris to detect disks; the method depends on the version of Solaris. This article provides a how to